After that, Close the terminal emulator window on your Computer or Laptop.Īt this point, your Cisco router is reset and will boot into its factory default configuration or settings the next time you power it on.

To reset your router settings back to the original factory Configuration, follow below steps. This will delete(Format) any configuration you have on your Cisco router. The steps below assume you have connected your Cisco router to a console and have accessed your router’s command line interface(CLI).

Then, switch on your router and within the first 20 seconds of startup send a break character to the terminal.

Windows OS – If you are using PuTTY, on your keyboard press Ctrl + Break buttons at the same time or you right click on the bar at the top of the PuTTY window and select Special Command > Break.

Mac OS – If you are using terminal, on your keyboard press Control + A, then Control + B.

You may also refer to the Cisco page on Standard Break Key Sequence Combinations when Recover Password.

Next, You will immediately be taken to the prompt.

After that, at the prompt, type the following command to tell the Cisco router to skip the existing configuration or settings on startup: confreg 0x2142.

Then, at the prompt, type the following command to restart the Cisco router: reset.Next, If you are prompted for initial configuration dialogue, type no.Then, After the loading has stopped, press Return to be taken to the main prompt on screen.Type write erase to issue the erase comment.Type config-register 0x2102 this tells the Cisco router to process existing config on startup.Finally, switch off your router and then turn it back on.How To Change The Cisco RV325 Router Wi-Fi Password : Your router has now been restored to the original factory configuration. These steps will help if you want set a different Wi-Fi password or connect a new device and you can’t remember your Cisco Wi-Fi password. First, connect your device to your Wi-Fi modem.Then, open a web browser like firefox or chrome and key in 192.168.0.1 in the address bar and press Enter.Password: password (or your current router Wi-Fi password).After that, enter the following default settings to access the router modem settings and select Login. Next, select Setup from the menu at the top of the router page.

Reset cisco 5505 asa